When it comes to irrigation, choosing the right sprinkler isn’t just about watering crops — it’s about protecting yield, managing pressure, and preventing wasted water.
If you're upgrading your system or replacing worn components, here’s what you need to consider before ordering.
1️⃣Know Your System Type
Most farmers are running one of these:
- Center Pivot Systems
- Lateral / Linear Move Systems
- Solid Set Systems
Your sprinkler choice must match your setup. Pivot systems often use low-pressure sprinklers designed to distribute water evenly while reducing drift and evaporation.
2️⃣Check Your PSI (Pressure Matters)
This is one of the biggest mistakes we see.
Too much pressure:
- Causes misting
- Increases evaporation
- Wastes water
Too little pressure:
- Uneven distribution
- Dry spots in the field
Many Senninger sprinklers are designed to operate efficiently at lower pressures, especially when paired with the correct pressure regulator.
Before ordering, confirm:
- Operating PSI at the sprinkler
- Whether regulators are already installed
3️⃣Consider Crop Type & Field Conditions
Different crops require different application patterns.
For example:
- Row crops may benefit from controlled droplet application
- Taller crops need sprinkler placement adjustments
- Sandy soil drains differently than clay soil
Matching the sprinkler type to your crop can improve consistency and reduce runoff.
4️⃣Don’t Forget About Regulators
Pressure regulators protect your entire irrigation line.
Without proper regulation:
- Sprinklers won’t perform correctly
- Wear and tear increases
- Water distribution becomes inconsistent
If you're replacing sprinklers, it's often smart to inspect or replace regulators at the same time.
5️⃣When in Doubt — Ask
Every irrigation setup is a little different. If you're unsure:
- Know your PSI
- Know your pipe size
- Know your system type
Then reach out.
The team at Bradshaw Supply can help make sure you’re ordering the right fit the first time.
📞 Call us at (910) 285-2764
📧 Email: sales@bradshawsupply.com